Software Firstcom Fc-01g \/\/FREE\\\\

How to Program and Set Up Your Firstcom FC-01G Radio

If you are looking for a reliable and easy-to-use radio, you might want to consider the Firstcom FC-01G. This radio is a dual-band VHF/UHF handheld transceiver that can operate on 136-174 MHz and 400-470 MHz frequencies. It has 16 memory channels, a built-in FM radio, a flashlight, and a VOX function. It also comes with a rechargeable battery, a charger, an antenna, a belt clip, and an earpiece.

But before you can use your Firstcom FC-01G radio, you need to program it and set it up according to your needs. Programming your radio means entering the frequency, tone, and other settings for each channel. Setting up your radio means adjusting the volume, squelch, power level, and other functions. You can do both of these tasks manually or with a computer software.

In this article, we will show you how to program and set up your Firstcom FC-01G radio manually. If you prefer to use a computer software, you can download it from here[^2^] and follow the instructions in the manual.

How to Program Your Firstcom FC-01G Radio Manually

To program your Firstcom FC-01G radio manually, you need to enter the frequency mode first. To do this, turn on your radio and press the VFO/MR button until you see "VFO" on the display. Then follow these steps:

Select the band you want to program by pressing the A/B button. You can choose between VHF (A) or UHF (B).

Enter the frequency you want to program by using the keypad. For example, if you want to program 145.500 MHz, press 1 4 5 5 0 0.

If you need to enter a tone or a CTCSS code for the frequency, press the MENU button and use the arrow keys to select the option you want. For example, if you want to enter a tone of 88.5 Hz, select TONE and press MENU again. Then use the arrow keys to select 88.5 and press MENU again.

Press the VFO/MR button again to save the frequency and exit the frequency mode.

Repeat these steps for each channel you want to program.

How to Set Up Your Firstcom FC-01G Radio Manually

To set up your Firstcom FC-01G radio manually, you need to enter the menu mode first. To do this, turn on your radio and press the MENU button until you see "MENU" on the display. Then follow these steps:

Use the arrow keys to select the option you want to adjust. For example, if you want to adjust the volume, select VOL.

Press the MENU button again to enter the option. Then use the arrow keys to adjust the value. For example, if you want to increase the volume, press the up arrow key.

Press the MENU button again to save the value and exit the option.

Repeat these steps for each option you want to adjust.

Some of the options you can adjust in the menu mode are:

VOL: Volume level

SQ: Squelch level

PW: Power level (high or low)

BEEP: Beep sound (on or off)

TOT: Time-out timer (0-600 seconds)

VOX: Voice-operated transmission (on or off)

FM: FM radio (on or off)

LAMP: Backlight (on or off)

Conclusion

The Firstcom FC-01G is a versatile and user-friendly radio that can be programmed and 061ffe29dd